Archived product

HDR Special Projection Unit

LY-HDR36G-4

LY-HDR36G-4
LY-HDR36G-4LY-HDR36G-4
The LY-HDR36G D-ILA HDR system creates very bright peak-brightness and superior colour reproduction, making it an ideal solution for exterior or interior automotive lighting design. It saves a huge amount of time and cost for companies, since it’s able to simulate realistic lighting events without the need to build physical design samples.

Ausstattung

  • HDR (High Dynamic Range) Display
  • High contrast ration 40,000:1
  • Full HD resolution, 1920x1080 50/60p
  • Up to 16bit/color
  • 2.4, 4.8 and 10 gain screen available which creates up to 10,000 nits.
  • Specialist for Light construction Simulations
  • Support by OPTIS Light Simulation Software
  • Calibration by optional Software
  • Up to 10.000 Nits
  • Comes with a screen Gain of 4.8 at 4.500 Nits
  • DCI P3 98% covered
Mehr anzeigen
Technische Daten

LY-HDR36G-4 - HDR Special Projection Unit

weitere Funktionen
Cost reduction - innovation of engineering process
• The system achieves comparable luminosity to prototypes with flare phenomenon
• Displays simulation results in the actual luminance value
Creating images closer to reality - High Dynamic Range (HDR)
HDR (High Dynamic Range) refers to images where the dynamic range between bright areas and dark areas is wide. Cameras made in recent years have a wide dynamic range, but with typical displays, the dynamic
range that can be displayed is limited; therefore, true HDR images cannot be displayed. On the other hand, the dynamic range of JVC’s HDR Rear Projection System is wider than typical displays and is similar to a camera’s; therefore, it is possible to project a luster and details of dark areas simultaneously that could not be displayed before. With the maximum brightness of 4,500cd/m², you can experience the expression of images with a sense of reality close to the real thing.
The LY-HDR36G system, which is based on the dedicated DLA-HDR36G projector, has a wide contrast ratio
to build nearly 16 F-Stops. The image processing and colour reproduction goes up to DCI P3 colour gamut
level (normal HD is REC 709). The gamma needs to be adjusted for this type of image reproduction and this
dedicated projector uses PQ Gamma specification.
JVC uses dedicated optical wire-grid technology which reduces internal light reflection in the optical path.
In combination with the JVC D-ILA Direct-Image-Light-Amplifier, it reproduces natural images.
By using a non-glare screen, the system can be used in environments where front reflections could otherwise
disturb the image. Replacing the front screen on the LY-HDR36G system takes just seconds, so you can
change your screen without needing an engineer. The D-ILA HDR system can also be used for other
applications, such as video reference screening, or HDR museum object presentation.
Optional:
Calibration software
To deliver consistent quality or to match the screening system to specific needs, JVC supports
dedicated calibration software*. In combination with an X-Write or Minolta Colour Meter* you be able to
change your settings for different colour balance and specifications. The HDR LY-HDR36G offers a colour spec up to DCI P3. Also different Gamma settings are available, like Gamma 1.8/2.2/2.6, etc..
Bildwandler
Projektor Technologie
D-ILA
Bildwandler
0,69"
Anzahl der Bildwandler
3
Native Auflösung
1920 x 1080 Pixel
Maximale Auflösung
1920 x 1080 Pixel
Licht-Quelle
Lichtquelle
265 Watt UHP Quecksilberlampe
Lampentyp
PK-L2615U
Anzahl der Lampen
1 Stk.
Lebensdauer der Lampe (Sparmodus)
4500 Hours
Projector Rear-Screen Type
Screen Type Glare / Non Glare
Glare SH-HDR36G4 (LY-HDR36G-4 default screen)
Screen Size Diagonal
36"
Screen Size width / height in mm
W 796 mm / H 452 mm
Screen Material hard/soft
hard
Screen Gain Factor
4,8
Screen others:
other screen types are available
Helligkeit und Kontrast
Brightness in Nits (dedicate Displays only)
4500 Nits
Kontrastverhältnis (Nativ)
40000 zu 1
Manuelle Lampenstrom-Einstellung
Hoch / Gering
Farbtiefe
16 Bit
Farbraum
DCI P3 (98%)
Objektiv
Model Name
JVC Regular Lens
Festes Objektiv
Ja
Objektiv im Lieferumfang
Ja
Zoom-Typ
elektrisch
Fokus-Typ
elektrisch
Blende
3,2 bis 4
Brennweite f:
21,4 mm - 42,8 mm
Lens Ratio Faktor
1,4:1 zu 2,8:1
Linsen-Typ A
JVC Regular Lens
A) Projektionsverhältnis
1.4:1 zu 2.8:1
A) Blendenöffnung F:
3,2 bis 4
A) Brennweite f:
21,4mm bis 42,8mm
A) Zoom elektronisch oder manuell
Electrical
A) Focus elektronisch oder manuell
Electrical
Lens Memory Funktion
Ja
Lens Memory Speicherplätze
10
Fokus/Zoom Einstellung mit integrierten Testbildern
Ja
Fokus/Zoom Einstellung mit Bildsignal
Ja
Ausstattung
Bildmodus-Voreinstellungen
Dynamic / sRGB / DCI / 6 User Modes
Farbtemperatur
5500K / 6500K / 7500K / 9300K / High Bright / 3 User settings
Gammaeinstellungen
2.2 and 3 User Modes
Gammaverarbeitungstiefe
12 Bit
Manuelle Gammaeinstellungen
With dedicate Service Software
HDR Kompatibel
Ja
HDR Gamma
ST2084 / Hybrid Log
HDR Bildmodus
With dedicate Service Software
Farbmanagement
6-Achsen-Farbmanagement-System
Clear Motion Drive
Off/On
Motion Enhance
Off / Low / High
Progressive
Auto / Off (interpolationsmethode bei interlaced Quellen)
Picture tone Funktion
Farbauswahl / Helligkeit / Hell- und Dunkel-Level
Pixel Anpassfunktion (gesamter Bildschirm)
Ja
Pixel Anpassfunktion (ausgewählter Bereich)
Ja
Spielemodus (Low Latency)
YES Blur Reduktion Modus ON/OFF
Auto Kalibierung
external optional Software Tool PK-CS1501 (optional cost)
Other Calibration Tools
external optional sensors needed
Leinwandmaskierung
Aus / 0 to 220 Pixel an allen vier Seiten
Start up Logo
Ja
Input Channel Hide
Generelle Bild/Ton Unterdrückung
Ja
Integrierte Testmuster
Ja
Projektor Status Anzeige
Ja
Menüposition wählbar
Ja
Schwarz-/Blaubild wählbar (wenn kein Eingangssignal anliegt)
Ja
Eingangssignale
HDMI Eingangssignal
Video; 480 60p, 576 50p, 720 50p/60p
1080 50i/60i/24p/25p/30p,50p/60p
RGB/YCbCr 4:4:4, YCbCr 4:2:2, 8/10/12bit
Eingangspegel einstellbar
16 - 235 Video (fix range) 0 to 255 PC (fix range)
Farbraum für Eingänge
YcbCr4444 / YCbCr422 / RGB
Eingänge
HDMI Eingänge
Ja, 2 x HDMI
RS232C
Ja, 9 PIN Sub-D
LAN-Anschluss
Ja, RJ45
IR Fernbedienung
through screen
Steueranschlüsse
RS232C
Ja, 9 PIN Sub-D
LAN-Anschluss
Ja, RJ45
IR Fernbedienungsempfänger
Through screen
IR Codes zur Auswahl
2
Spezifikationen
Betriebsgeräusch
27dB
Spannungsversorgung
AC 100-240V, 50/60Hz
Leistungsaufnahme
380 Watt
Leistungsaufnahme im Standby-Modus
1,5W
Temperatur Betriebsumgebung
5C bis 35C
Luftfeuchtigkeit Betriebsumgebung
20% bis 80%
Einbauhöhe
Unter 5.000 Fuß (1.524 m)
Abmessungen
B 803 x H 906 x T 730 mm
Gewicht
67,8kg
Höhenlagen Modus
Ja, sollte auf über 900 Meter eingeschaltet werden
Zubehör
Netzkabel
EU AC
Fernbedienung
Ja
Batterie
2 x AAA Type
Sonstiges
Safety Info Doc include for Full Instruction, please download form this web site
Allgemeine Hinweise
Hinweis
Bilddarstellungen sind simuliert. Circa Angaben bei Gewicht und Abmessungen. E.&O.E. Vorbehaltlich Änderung von Design, Bauweise und technischen Daten ohne Vorankündigung.
Zubehör

Image of Projector Light Sources (PK-L2615UG)

PK-L2615UG

Ersatzlampe

Details

Image of Calibration Software or Tools (PK-CS1501G)

PK-CS1501G

Kalibrierungssoftware +

Details

Image of Special Screens for Projection (SH-HDR36G2)

SH-HDR36G2

Spezialbildschirm für Projektion

Details

Image of Special Screens for Projection (SH-HDR36G4)

SH-HDR36G4

Spezialbildschirm für Projektion

Details

Image of Special Screens for Projection (SH-HDR36G10)

SH-HDR36G10

Spezialbildschirm für Projektion

Details

Image of Special Screens for Projection (SH-HDR36N2)

SH-HDR36N2

Spezialbildschirm für Projektion

Details

Image of Special Screens for Projection (SH-HDR36N4)

SH-HDR36N4

Spezialbildschirm für Projektion

Details

Image of Mechanical Tools and Stands for Projection (EF-ST36)

EF-ST36

Mechanisches Zubehör und Halterungen für Projektionen

Details

Ähnliche Produkte

Image of Head Mounted Display (HMD-VS1W)

HMD-VS1W

Head Mounted Display

Details